AVIC D3 Bypass with PICTURE!!!

**Sponsor**

by **chink331** on Sun Mar 04, 2007 2:55 am

Avic D3 bypass!

by **JasonH** on Sun Mar 04, 2007 2:59 am

Stickied

by **cntrylvr79** on Sun Mar 04, 2007 5:17 am

Good job. What did that take a day aybe 2 to find. Now I wonder how many idiots are going to try and profit from this on fleabay.

by **aznsmartass24** on Sun Mar 04, 2007 5:22 am

actually, its a regular occurrence on ebay to see people sell the bypass. I remember some guy selling the Z1/Nx/Dx bypasses on ebay. The information he sent was an exact copy of what was posted on here. I messaged him saying how much of a douche he was to sell the information found on avic411, and let's just say he didn't respond with a PG message.

by **whtcrxghst** on Sun Mar 04, 2007 8:23 am

I posted how to do it yesterday. You were too busy making posts to read it

cntrylvr79 wrote:Good job. What did that take a day aybe 2 to find. Now I wonder how many idiots are going to try and profit from this on fleabay.

by **BradleyJ** on Sun Mar 04, 2007 2:44 pm

Damn,
I can't wait for my D3 to come in!!! Am I correct in saying that this bypass will not affect the warranty???

by **hybridamp** on Sun Mar 04, 2007 4:17 pm

Of course you're correct, as long as you move the wire back to the original pin before sending it off for warranty repair.

by **Reach** on Sun Mar 04, 2007 4:27 pm

OK, I've got to ask.

What functionality is lost by removing the mute wire from its original location? If there is functionality lost, wouldn't it be better to add a new wire to the above location and ground it out with the parking brake?

TIA

by **Mannyman** on Sun Mar 04, 2007 4:39 pm

Okay the bypass works for me too.

Only thing is, now my car disables the controls if the car is in motion. After driving about a 1/4 mile I got a screen from the unit saying it detected that the parking brake wire was improperly disconnected. Then I noticed the navi search controls were disabled. The second I stopped at a traffic light they came back and then as soon as I started moving again they went away again.

by **Klaus** on Sun Mar 04, 2007 4:54 pm

Mannyman,

I wonder if resetting the unit would fix the problem.

by **Mannyman** on Sun Mar 04, 2007 4:58 pm

Is anybody else experiencing what's happening to me?

I still haven't put any dvd's in after bypassing so I wonder whether or not movies will play while I am moving. Not that I would use that feature but I'm sure someone out there wants to know.

by **PaisanNYC** on Sun Mar 04, 2007 5:33 pm

You have a loose wire, or as said already, reset the unit.

by **whtcrxghst** on Sun Mar 04, 2007 7:39 pm

No functionality is lost unless you are using another brands equipment that needs to mute the stereo. For example, those old car kits that had the phone laying in a cradle next to the console. Those needed that wire to tell the stereo to shut up when the phone rings. Applications that use that wire are very rare now

Reach wrote:OK, I've got to ask.

What functionality is lost by removing the mute wire from its original location? If there is functionality lost, wouldn't it be better to add a new wire to the above location and ground it out with the parking brake?

TIA

by **4x4freak** on Sun Mar 04, 2007 9:50 pm

worked for me.

by **Phanon_TC** on Mon Mar 05, 2007 1:11 am

http://www.fjcruiserforums.com/forums/s ... ass-2.html

someone who has also done it on his d3